Choosing the Right Scaffold Tubes: Essential Guide for Safety and Stability
Choosing the Right Scaffold Tubes: Essential Guide for Safety and Stability When it comes to scaffolding, the importance of selecting […]
Scaffolding parts
Joint Pin
Joint Pin: – It is also used to connect two tubes under compression loading. – This joint pin can take
Sleeve Coupler (Box Clamp)
Sleeve Coupler (Box Clamp): – It is used for connecting one standard to another standard in vertical direction & horizontal
Girder Coupler (Beam Clump)
Girder Coupler (Beam Clump) – It is used for connecting tubes with structure & beam – Load Capacity = 3000kg
Swivel Coupler
Swivel Coupler: – It is used for connecting bracing & outrigger. – Load Capacity = 610Kg
Double Coupler (Right Angle Coupler)
Double Coupler (Right Angle Coupler): – It is used for connecting the ledger (Runner) with the standard. – Load Capacity
Scaffold Plank
Scaffold Plank: -It should be free from any defect or corrosion. -Size = 2100mm * 280mm * 38mm -Plank comes
Ladder
Ladder: – A ladder is a piece of equipment used for climbing up & down. – The ladder should be
Coupler/Clamp:
Coupler/Clamp: -Join two scaffold tubes to each other to assemble a scaffold. 1) Right Angle Coupler (Fix Clamp) -Load Capacity
Transom (Bearer):
Transom (Bearer): -Place the transom inside the standard & over the ledger. -Transom must be fitted with a fixed clamp.
Tubes:
Tubes: – Outer diameter of scaffold pipe = 48.3mm – Before Use, check it properly. Flame Cut Tube Cross Cut
Kicker Lift:
Kicker Lift: The first runner is installed 150mm above the ground surface is called kicker lift